Hello,

I need to know which is the standard lock object (or function module) used for MARC.

Regards,

João

please friends help me out to solve this problem

Hello gurus,

I have an  urgent question.

After upgrading our ERP-basis system from 7.01 to 7.31 (EHP6) we are facing problems with our communication to XI.

We're receiving message:

PARSER.UNEXPECTED_VALUE Das XML-Tag Main/@versionMinor hat den falschen Wert 001; es wurde der Wert 000 erwartet

or in English.

PARSER.UNEXPECTED_VALUE XML tag Main/@versionMinor has incorrect value 001; expected value is 000

Is this message, because or XI-system is to old, or do you have an other solution.

Please provide some help soon.

Kind regards,

Gert-Jan

how do we know a purchase requisition created manually or generated through MRP

As per my knowledge , we can get this differentiation through MD09 T-Code , here we can get pegged requirement data for MRP generated PRS and procurement data  for manual PRS and also QTY without source filed updation.

Is there any alternate solution to find out this & suggest tables where we can get this data

hello,

We are planning to upgrade our BW system from 7.0 to 7.3.  We need a  general BW 7.3 upgradation Checklist like Pre-upgrade BW activity and post-upgrade BW activity. Can you please provide us some check list.

Regards

shekhar

Hello all,

We would like to install ECC6 including EHP6.0 ABAP based only, i went through its master guide which says it should be install based on SAP NW 7.0 including EHP3 (linux + oracle). But when i am seraching in installation and upgrade guide area on portal i didn't find it. Infact in software catalog as well, i didn't find it although i found SAP NW 7.0, 7.0 with EHP1 and with EHP2, NW 7.3, NW 7.3 with EHP1.

Does anybody has information about the installation guide and installation media for NW 7.0 including EHP3?

If we go and install SAP NW 7.3 with EHP3 ABAP only, the latest version, what ECC version it should reflect? Is there any conjunction between ECC6(any version..) and NW 7.3 with EHP3? Currently we are implementing FICO module.

I'll really appreciate your inputs.

Thanks,

vicks

Dear Experts,

We have developed custom fields in PM order (IW31). These custom fields are incorporated in the standard report transaction IW38 and IW39. This developments was working fine in DEV and QAS system. Once we moved this devlopment to PRD so many standard transactions like IW31, IW32, IW33, IW38 and IW39 were giving dump. Please find the attached dump for your reference.

Thanks in advance.

Hi Guys,

How to check the performance issue for webdynpro abap .

Hi Team,

I created FM to create Notification ( RFC ) and Created WebSErvices.It showing Wrong URL in WSDL in Enterprise Service

Here are the steps what I did :

1) Created FM and Created WebService.

2) SE80 --> My PACKAGE --> Enterprise service --> service Defination --> ZPM_NOTIF -- > WSDL tab, showing wrong URL ?

    If I use this url in iExplorer, Page not found.

3) Tcode --> SOAMANAGER, SELECT SERVICE --> APPLY SETTINGS --> Create Service and did the Binding. In SOAMANAGER--> OPEN WSDL it is pointing to incorrect URL. Say http://XXXXCSXXX:w10:8031/sap/bc/srt/xxxxxxxxxxxx  CS is Old Development Client

Wrong URL in ES for FM --> say http://XXXXCSXXX:w10:8031/sap/bc/srt/xxxxxxxxxxxx  

4) When I try to give this URL's to Other system to access SAP , its not creating Notification. Please let me know where we need to do the settings to point out the correct URL in Enterprise service --> service Defination --> WSDL?

Apprieciate your help in this regard.

With Regards,

Bala.M

Hi all,

I'm facing the problem that something tries to logon as DDIC in client 000 every few minutes.

As the PW is wrong DDIC is locked after three attempts.

There is nothing helpful in the syslog. I've already checked all incoming RFC connections but didn't find anything helpful.

Currently I run a trace in ST01 but no info yet.

Has anyone an idea how to find out where these logins come from? It's not very funny to run a EhP installation and unlock DDIC every three minutes :-(

Cheers,

Helmut

Hi folks !

I'm experiencing problems during activating scenarios in the BP Baseline Installation Assistant (BL_ERP606_BRV1).

When I press the "Activate" button in the Installation Assistant for /SMB99/PREREQ_INTEGRATION_100, the error message appears:

Activation stopped with an error

Message no. /SMB/BBPRJ_INST123

The pop-up is shown:

==============================================================================

Add-on is not up to date

Situation

The add-on release installed in your system (see title bar) is not

up to

date, a newer version is available. Install the latest add-on as

described below to avoid issues during the activation of your SAP Best

Practices version.

Procedure

Download the latest add-on from the SAP Service Marketplace, Software

Download Center. For any details follow the download instructions as

described in the SAP Best Practices Quick Guide.

The Quick Guide is attached to the overview note of your SAP Best

Practices version. The number of the SAP Note can be found on the

documentation DVD in the section "Feedback & Support" -> Support

Information.

The documentation DVD is also available for online access via the SAP

Help Portal http://help.sap.com/bestpractices

==============================================================================

In principle, that all pre-requisites was fulfilled, according to QuickGuide, SAP Notes 1301301, 1770759, 1240936, 1670121, 1706705, including

the BP-ERP_606V4_Correction_transport.zip (RT6K907188).

1) I have installed an ERP 606.

2) The support packages installed/updated to implement Baseline Best Practices was:

SAPKD73148 SPAM/SAINT Update - Version 7.31/0048 Imported on 22.03.2013 at 17:42:08

SAPKB73101 SAP_BASIS 731: SP 0001 Imported on 22.03.2013 at 18:32:01

SAPKA73101 SAP_ABA 731: SP 0001 Imported on 22.03.2013 at 19:20:15

SAPK-73101INPIBASIS PI_BASIS 731: SP 0001 Imported on 22.03.2013 at 19:34:10

SAPKW73101 SAP_BW 731: SP 0001 Imported on 22.03.2013 at 19:34:11

SAPK-73101INMDGFND MDG_FND 731: SP 0001 Imported on 22.03.2013 at 19:48:05

SAPKNA7025 SAP_AP 700: SP 0025 Imported on 22.03.2013 at 19:38:36

SAPKNA7026 SAP_AP 700: SP 0026 Imported on 22.03.2013 at 19:38:37

SAPK-73101INSAPBSFND SAP_BS_FND 731: SP 0001 Imported on 22.03.2013 at 19:48:04

SAPK-73101INWEBCUIF WEBCUIF 731: SP 0001 Imported on 22.03.2013 at 19:48:03

SAPKH60601 SAP_APPL 606: SP 0001 Imported on 22.03.2013 at 20:54:24

3) The add-ons installed to implement Baseline Best Practices was:

BP-CANW      731V4     0000      -     Tech. Obj. for SAP BP pkg. act. based on

BP-ERP      606V4     0000      -     SAP Best Practices All-in-One (EhP6)

BP-SOLBLD     70V8     0000      -     Solution Builder on SAP NW 7.02

4) The SAP Notes implemented by SNOTE are listed below (in addition, the pre-req notes was also implemented):

5) All steps contained in the QuickGuide (BL_ERP606_Quick_Guide_EN_BR 2.doc) was made to prepare the installation of Baseline Best Practices.

6) The installation files and solution files used to install was:

- INST_FILES_BR_BP_ERP606V4.zip

- SOL_BL_ERP606_BRV1_BP_ERP606V4.zip

So, after these, I cannot implement the Baseline Best Practices Package.

Can you help me, please ?!

I'll be waitting soon.

Regards,

Rodrigo A. Botelho